TV mounting above a fireplace
A TV above a fireplace needs a little more thought than a TV on an open wall. The fireplace, mantel and your seating position all affect where the screen should go. We look at those details together so the finished setup feels considered and you understand why we recommend a particular height or mount.
Tell us what kind of fireplace you have, what the wall above it is made of and the size of your TV. If you already have a mount, let our team know. If you need one, we can discuss a suitable option when you book.
How we do it
We start with the fireplace and mantel. A gas fireplace gives off heat, so we avoid placing the TV too low and often use a tilting mount at a higher position. A wood-burning fireplace is the trickiest case because it produces the most heat. The depth of the mantel matters: a shelf that projects farther can deflect rising heat and affect the position we choose.
Next, we consider the view from the sofa. Mounting above a fireplace often puts the screen higher than seated eye level. A tilt can angle the picture toward you. A pull-down mount is another option: it extends forward and lowers the TV for viewing when the fireplace is off.
We then choose the attachment and cable approach for the actual wall. On brick, the choice between fixing into the brick or the mortar joint depends on the material, the condition of the mortar and the age of the building. Your technician checks this on site rather than choosing from a photo alone.
On drywall above the fireplace, we can hide the cables inside the wall. On brick or stone, a paintable cord cover or a neat route along the mortar joints keeps the setup tidy. We discuss the visible cable route with you as part of the installation plan.
What we don't do and why
We do not place a TV low over a hot fireplace just to match the height of a normal living-room installation. Heat and the mantel shape affect the decision. A lower viewing position with a pull-down mount is for use when the fireplace is off.
We do not cut into brick or stone and repair the surface just to hide wires. We use a cord cover or work neatly along the joints instead. We also will not use a mount that is unsuitable for the screen or wall; we explain the alternative before proceeding.
Frequently asked questions
Can a pull-down mount make viewing more comfortable?
Yes. A pull-down mount extends forward and brings the screen down toward eye level when the fireplace is off. That can help when the normal mounting position is higher than you would choose for watching from the sofa. Tell us you are interested in this option when booking.
Does the mantel affect the mounting height?
Yes, especially above a wood-burning fireplace. How far the mantel projects affects how it deflects rising heat. A deeper mantel can allow a lower TV position, but the technician considers the fireplace and wall together before agreeing on the location.
Can you hide cables on every wall?
On drywall, we can hide cables inside the wall. Where we cannot go inside — including brick, concrete or exterior walls — we use a slim paintable cord cover. We do not cut into brick or concrete just to hide a wire. The aim is a clean result that suits the actual wall.
How long does installation take?
A standard TV mount on drywall takes about an hour for most TVs. Concealing cables, working on brick or concrete, adding a soundbar or mounting a very large TV adds time — usually up to two or three hours in total. We tell you the expected time before we start, and we do not rush to squeeze in more appointments.
What should I have ready for the visit?
Clear some space in front of the wall and put fragile or valuable things away. Have your mount, devices and their cables nearby if you already own them. Think about your preferred screen height; we can help you decide on site. The TV does not have to be in the room — your technician can carry it in.
